Whole Home Water Filtration

Whole Home Water Filtration Systems

Our whole home water filtration systems are built for Australian water conditions. They remove chlorine, PFAS, heavy metals, pesticides, and sediments, delivering clean, safe water to every tap.

  • Filtration rating: 5 micron
  • Certified: Australian WaterMark & ISO standards
  • Benefits: Odour-free, better taste, healthier showers, softer laundry

Benefits of Whole Home Filtration

Consistent clean water to every outlet

Eliminates odour and taste issues

Protects appliances and plumbing from scale

Triple Whole House Water Filter System with Stainless Steel Enclosure (HPF-3)

  • Durable & Sleek Tamper-Resistant & Weather-Resistant 304 Brushed Stainless-Steel Enclosure to Protect Your System
  • Three Customisable Filter Options: Choose from Our Range of Sediment and Carbon Filters Compliant to National Sanitation Foundation/ANSI Standard No. 42 in 20″ x 4.5″ Size
  • Watermark Certified to Australian Plumbing Standards AS/NZS 3497
  • Quick and Straightforward Installation
  • Pressure Gauges Included
  • 304 Stainless Steel Threaded Inserts on Filter Housings

Specs/Performance

System Size Dimensions:

  • Height: 74.5cm
  • Width:  60cm
  • Depth:  22cm 

Filter Housings:

  • High Flow UV Resistant Filter Housings
  • Fits 20″ x 4.5″ Filters

Ports:

  • Inlet: 1″ Female BSP (British Standard Pipe) Thread
  • Outlet: 1″ Female BSP (British Standard Pipe) Thread
  • 304 Stainless Steel Threaded Inserts on Filter Housings

Pressure Gauges:

  • Size: 60mm Diameter
  • Pressure: 0-150 PSI or 0-10 kPa
  • Limit Pressure: ≤ 500 kPa
  • Temperature: 0.5°C – 37.8°C
  • Max Flow: 60 Ltrs/min (*System tested to 160 Ltrs/min. Maximum flow measured without cartridge. Refer to cartridge specs for flow rates.)
  • Initial ΔP @ Flow: 10 kPa @ 57 Ltrs/min
  • Thread: 1/4 NPT Thread
  • Position: Bottom or Vertical Mount
  • Type: Oil Filled with Chrome finish 

Under the Stainless Steel Covers of the High Performance Twin and Triple Whole House Systems

Those on mains water usually don’t get that much visible sediment (as compared to those on tank water, for example), however, ultra-fine particles (i.e. particles that are smaller than 100 micron, the width of a human hair) can clog up your carbon filters much quicker than anticipated and reduce your water pressure. The issue of elevated sediment is especially prevalent if you live in an area with known water quality issues, or if there is an influx of sediment, for example, due to public works, flooding and drought, which are all common causes of elevated Total Suspended Solids levels in mains water. So, whilst Carbon filters do block sediment and it is possible to run a Dual Carbon system, please consider whether a Triple Filter System with a Sediment Pre-Filter and Dual Carbon set-up is more suitable for your water conditions.